Cliptite Clear
Fast Setting Transparent Epoxy Adhesive
Areas of Application
Clipper Cliptite Clear (Resin & Hardener) is a two component high strength transparent fast setting epoxy adhesive to easily bond a wide range of materials in just 5 minutes. It can be applied to bond Glass, Ceramic, Jewellery, Handicraft, Metals, Marble, Granite & other Stones.
• Repair & Maintenance
• Household & DIY Application
• Industrial Application
Fast Setting
Maximum Strength in 1 Hour
Transparent
High Electrical Insulation
Waterproof
Chemical Resistant
Heat Resistant
Non-Toxic & Non-Corrosive
Colour
Transparent
Directions For Use
• Thoroughly roughen and clean the surface
• Mix by Volume (Resin : Hardener = 1 : 1)
• Mix thoroughly to form uniform mixture
• Apply thin layer on both surface
• Clamp the joint for 5 mins to allow it to set
Pack Size
500 g (Resin 250 g + Hardener 250 g)
2 kg (Resin 1 kg + Hardener 1 kg)
Shelf Life
2 years from the date of manufacturing.
Technical Specifications
| Colour | Part A: Transparent Part B: Transparent |
| Viscosity @ 25˚C | Part A: 50k-70k cps Part B: 40k-50k cps |
| Pot Life | 5 mins |
| Hardening Time | 60 – 90 mins |
| Curing Time | 24 hours |
| Hardness (Shore D) | 68-70 |
| Tensile Strength | 165-175 kg/cm² |
Explore Other Products
