Cliptite Fast
High Strength Fast Setting Epoxy Adhesive
Areas of Application
Clipper Cliptite Fast (Resin & Hardener) is a two component high strength fast setting epoxy adhesive to easily bond a wide range of similar and dissimilar substrates likes Marble, Rubber, Wood, Metal, Ceramic, Glass & most Plastics etc.
• Repair & Maintenance
• Household & DIY Application
• Industrial Application
High Bond Strength
High Impact
Fast Setting
High Initial Strength
Multiple Substrates
Versatile
Heat Resistant
Easy To Apply
Directions For Use
• Thoroughly roughen and clean the surface
• Mix by Volume (Resin : Hardener = 1 : 1)
• Mix thoroughly to form uniform mixture
• Apply thin layer on both surface
• Clamp the joint for 30 mins to allow it to set
Restrictions
• Not to be used in under-water application or on damped surface.
Pack Size
500 g (Resin 250 g + Hardener 250 g)
2 kg (Resin 1 kg + Hardener 1 kg)
Shelf Life
1.5 years from the date of manufacturing.
Technical Specifications
| Physical state | Viscous liquid |
| Colour | Part A: Light Blue Part B: Light Red |
| Viscosity @ 25˚C | Part A: 2800-3200 cps Part B: 8000-12000 cps |
| Pot Life | 3-5 mins |
| Hardening Time | 10 mins |
| Curing Time | 2 hours |
| Shear Strength | 100-120 kg/cm² |
Explore Other Products
