Cliptite Super
Standard Setting Epoxy Adhesive
Areas of Application
Clipper Cliptite Super (Resin & Hardener) is a two component waterproof standard setting epoxy adhesive to easily bond a wide range of materials. It can be applied to bond Stone, Rubber, Wood, Metal, Ceramic, Glass, Concrete & most Plastics.
• Repair & Maintenance
• Household & DIY Application
• Industrial Application
High Mechanical Strength
High Electrical Insulation
Waterproof
Heat Resistant
Chemical Resistant
Versatile
Non-Corrosive
Easy To Apply
Directions For Use
• Thoroughly roughen and clean the surface
• Mix by Volume (Resin : Hardener = 1 : 1) or Mix by Weight (Resin : Hardener = 1 : 0.8)
• Mix thoroughly to form uniform mixture
• Apply thin layer on both surface
• Clamp the joint & allow it to set overnight
Pack Size
450 g (Resin 250 g + Hardener 200 g)
1.8 kg (Resin 1 kg + Hardener 800 g)
Shelf Life
2 years from the date of manufacturing.
Technical Specifications
| Physical State | Viscous Liquid |
| Colour | Part A: Milky White Part B: Pale Yellow |
| Viscosity @ 25˚C | Part A: 45k-55k cps Part B: 35k-45k cps |
| Amine Value | 290-320 |
| Pot Life | Upto 60 mins |
| Tensile Strength | 100-120 kg/cm² |
| Hardness (Shore D) | 75-80 |
Explore Other Products
